Table of Contents
Advertisement
Using the Toolbar Buttons
Use the toolbar to direct script processing, referring to Table 10 for instructions.
Click to start
2
(transmit) the
script.
1
Table 10. Script Execution Menu Commands and Toolbar Buttons
Menu Command
Button
Start Script
Click to stop
script execution.
Pause Script
Stop Script
Run Continuous
Setup Script
Configure Script
Monitor
Parameters
Print Log
Exit
Depress before running the script, to set the script
to run repeatedly until you stop it (vs. only once).
Used to...
Start the script (i.e., begin transmission of the sequences in
the script). After you start the script, the elapsed-time
counter (right) becomes active, allowing you to track the time
since execution began:
The Stop Script button is also enabled, allowing you to stop
transmission at any time.
Pause the script. Not currently implemented.
Stop the script (only available during execution). When you
click this button, the Start button is enabled, allowing you to
restart the same script.
Indicate whether to execute the script once or continuously
(depressed for continuous execution). Even if you run the
script continuously, you can stop it at any time using the Stop
Script button.
Display the first window opened when you ran the script,
allowing you to respecify master header values and the
analysis device you want to use.
Not used.
Not used.
Exit from the script-execution window.
10: Running & Editing Scripts
10.1 Running a Script
Amount of time the
script has been running.
175
Advertisement
Table of Contents
