Table 1. Device Manager Menu Commands And Toolbar Buttons - Agilent Technologies 622Vu Advisor User Manual

Panel Field
Menu and Toolbar Commands
Use the Device Manager menu and toolbar commands as described in Table 1
(page 57).
Upgrading Firmware
Note: This operation is
only necessary if the
undercradle has lost its
programming. It should
not be necessary to do
this operation regularly.
To upgrade the firmware
on a 622Vu Advisor, choose Update Firmware from the Tools menu.
Using the dialog returned, enter your user name and password (initially admin
and adminpass, respectively), then navigate to the upgrade file you want to use.
Click Browse and then locate
Upgrade when you are through.
622Vu Advisor displays a progress bar during the upgrade, then asks you to
reboot the device (necessary after an upgrade, before you can access the device):

Table 1. Device Manager Menu Commands and Toolbar Buttons

Menu Command Equivalent Used to...
File
Exit
Description
If the analysis device is configured as a monitor-only
station, this is the amount of RAM available for
monitoring/retransmitting traffic over Channel 2.
c:\advisor\622Vu\firmware6.fls.
Toolbar
Close the Device Manager.
4: Configuring Analysis Devices
Click
57