Auriol Z32171B Operation And Safety Notes page 25

Setting the alarm
Press and hold the ALARM-/SET button
alarm settings mode. The last alarm setting will appear in place of
the clock, with the hour flashing. The mark A1 will appear to the
right of the alarm time.
Set the hour for alarm A1 using the UP button
DOWN- / -button
TIP: Press and hold the UP button or the DOWN- / -button to
quickly scan ahead or back.
Press the ALARM-/SET button again to confirm your entry, and he
minutes will start flashing. These can be changed in the same manner.
Activating the alarm
In clock mode press the DOWN- /
time a bell will appear with 1:
the DOWN- / -button again and the alarm symbol 1 will disappear.
Alarm symbol 2: .will appear. Pressing the DOWN- / -button
again will activate alarm 1 and alarm 2. Both alarm symbols will ap-
pear:
Pressing the DOWN- / -button a fourth time will deactivate both
alarm 1 and alarm 2.
Switching off the alarm
The alarm will sound at the set time and the backlight will switch on.
When not switched off, the alarm will sound for 2 minutes before
stopping automatically.
Press the SNOOZE-/LIGHT field
display will flash
been activated: the alarm will sound again after 5 minutes.
Press any button on the keypad to actually shut off the alarm.
.
15
. Alarm 1 is now activated. Press
2
/
, indicating the snooze function has
for 3 seconds to enter the
16
or the
14
-button . In addition to the
15
to interrupt the alarm. The clock
GB 25