Appendix C - Specifications - Sencore MRD 6000 User Manual

Appendix C - Specifications

MRD 6000 – Base Unit
Includes –
System –
Display Type:
Display Configuration:
Keypad:
Front Panel Lockout:
Configurations Allows:
Rear Panel:
Remote Operation/Update Interface –
Type:
Rear Panels indicators:
Connector:
Front Panel Indicators –
Error LED:
INPUT LED:
Monitor and Control Interfaces –
Web server GUI:
Front Panel:
SNMP:
Operating Altitudes
AC Power –
Operating Voltage:
PSU Max Power:
Current Draw:
Max Power Draw:
Frequency:
Connector:
Line Cord:
Page 80 (97)
MRD 6000 – User Manual
Display, keypad, embedded controller, chassis/case,
power supply/line cord
LCD
240 pixels by 64 pixels
Snap-dome Membrane
Password control, up to 8 alpha-numeric characters (no
punctuations or spaces allows)
Single video decoder with up to two option cards
Fixed inputs and outputs with two option card slots.
Option cards not field upgradeable.
Ethernet, 10/100
Link (Green LED), Activity (Amber LED)
RJ45
Red indicates error is occurring
Off indicates no errors detected
Green indicates valid input is present
Off indicates no valid input
HTTP via web browsing for control & monitoring
Control & monitoring
Control & monitoring
0 to 10000 feet
100-240VAC
150W
Base Unit with no option cards –
38-40W
MPEG/IP option card with active input –
2-3W (additional)
DVB-S/S2 option card with active input and LNB load of
19V @ 500mA –
8-9W (additional)
DVB-CI Module option with 2 CAM Modules installed –
2-3W (additional)
8VSB/QAM option card with active input –
2-3W (additional)
70-72W
48-63Hz
IEC C14
Detachable, 3-prong
Base Unit with active ASI input –
54-55W