Cisco MGX 8950 Installation Manual page 13

Chapter 3 Installing a Cisco MGX 8950
Attach the components to the mounting rails at the following points in the rack:
At the front, using the front flanges on each module.
•
At approximately midpoint, attach brackets to the components, and then attach the components to
•
mounting rails. For 23-inch racks, order the special adapter brackets from Cisco.
The mounting rail locations shown in
middle rear, and rear mounting rails.
Figure 3-5
Front rail
Release 3, Part Number 78-14147-02 Rev. A0, November 2002
Figure 3-5
Mounting Rail Distances
MGX 8950 Depth 24 in. (70 cm)
19.86 in. (50.44 cm)
10.0 in. (25.4 cm)
5.0 in.
(12.7 cm)
Allowable intermediate
rail positions
comply with racks that require mounting on front or
Module
Rear rail
Cisco MGX 8950 Hardware Installation Guide
Installation Procedures
3-13