Main Interface - NovaStar VX4 User Manual

Knob:
Press the knob under the main interface to enter the operation interface menu;
ƒ
Rotate the knob to select menu or press the knob under the operation interface
ƒ
of menu to select current menu or enter submenu;
Rotate the knob to adjust the parameter after selecting the menu with
ƒ
parameter; press the knob again for confirmation after adjustment.
ESC: Return key, exit current menu or operation.
Key lock/unlock: long press knob and ESC key simultaneously.

6 Main Interface

After starting the controller, the main interface of OLED display is as follows:
First row: Company name; the name and IP of the product are shown alternately;
Second row: Main screen 1; signal source; input source signal format;
Third row: PIP 2; signal source; input source signal format;
Forth row: Status bar. the meanings of all icons are shown below.
V X 4S /V X 4 User's M anual
NovaStar
1
1024x768@60Hz
VGA1
2
1024x768@60Hz
HDMI
2
3 4
1
LED Output (it is output Port 2 in primary mode currently, and
the backup status is displayed as )
PIP is turned off
PIP is turned on
The current effect is point-to-point display
It is "scale down" mode
It is "scale up" mode
Image Mosaic is not enabled;
Image Mosaic is enabled;
It is USB control currently
It is network port control currently
The current brightness is 25%
Sign of press key lock. When this icon appears at the main
interface, it is in locking state for key and knob functions.
192�168�0�10
25%
-4-