NovaStar VX4 User Manual page 16

Fn Settings
Audio Settings
Display Control
Inputs Backup
Normal: Normally display. Blank Out: The display is blank
ƒ
Freeze: The current play lists are frozen.
ƒ
Testing Pattern: There are eight kinds of testing screens in total, including pure
ƒ
color and lines.
Image Settings
ƒ
Contrast, Saturation, Hue, Color Temperature, Red, Green, Blue and Gamma value
are set according to the requirements. After they are adjusted to satisfaction, the
parameters should be saved.
Switching Effect:Set the effects when switching screens, including Quick switch,
ƒ
Fade, Shrink Center, Shrink Left Top, Zoom Center, Zoom Left Top and turning
off. After selecting the desired effect, it will take effect after pressing the knob.
Tips: When enabling PIP function, the switching effect will automatically disappear. Only
when PIP function is turned off, the special effect function of channel switching can take
effect.
Inputs Backup
To specify backup for input source and automatically switch to backup source if the
signal of input source has faults, which makes it more reliable.
Fn Settings
Audio Settings
Display Control
Inputs Backup
Indicating that DP has been set as the backup of HDMI and main input
HDMI
DP
source(which cannot be changed) is in left side of the arrow while backup(which can
be changed) is in the right side;
Both main input source and backup can be customized in Custom mode.
Output Resolution
This function can be used to set the the output resolution of monitoring. Users
can set the function according to actual use and choose either Reset Resolution or
Custom.
V X 4S/ V X4 Use r's M anual
-13-
Normal
Black out
Freeze
Test Pattern
Image Settings
Switching Effect
Backup
Backup 1 HDMI
Backup 2 VGA1
Backup 3 CVBS1
Custom Backup CVBS2
Enable
DP
SDI
VGA2
SDI