V-ZUG Unimatic TSL WP Operating Instructions Manual page 47

▪ The demo (dEno) mode is
turned on.
... the programme takes significantly longer than indicated
Possible cause
▪ The following parts in the
appliance could be
blocked:
– door filter
– filter mat in door filter
– base filter
– cooler filter
▪ Very wet washing.
▪ The ambient temperature is
too high.
... the washing is charged with static electricity
Possible cause
▪ Wash items that are made
of man-made fibres.
▸ Unplug at the mains and then plug back in
Demo mode
again. If
pears, clear the demo mode by opening the
appliance door and pressing the
and combination of buttons.
Solution
▸ Check and, if necessary, clean the parts.
▸ Spin washing at higher speed.
▸ Improve the ventilation of the room.
Solution
▸ Static charge is a normal characteristic of
man-made fibres and nothing to do with the
appliance.
9 Trouble-shooting
ON
ap-
,
47