V-ZUG Unimatic TSL WP Operating Instructions Manual page 46

9 Trouble-shooting
... «Final Airing» appears in the display
Possible cause
▪ The laundry is being
cooled down.
▪ A high ambient temperat-
ure extends the cooling-
down phase.
▪ The temperature sensor is
dirty.
... it is not possible to select a new programme after closing the appliance
door
Possible cause
▪ A programme was interrup-
ted.
... the appliance does not start
Possible cause
▪ The appliance door is
open.
▪ Interruption in power sup-
ply.
... the washing is not dry enough
Possible cause
▪ Load contained mixed fab-
rics.
▪ Interruption in power sup-
ply.
46
Solution
▸ No action is necessary. The laundry can be
unloaded at any time as long as it is then
spread out to cool down.
▸ Clean the temperature sensor.
Solution
Press the button.
Select a new programme.
Solution
▸ Close the appliance door.
▸ Insert the plug into the mains socket.
▸ Turn the wall switch on.
▸ Check the fuse or circuit breaker.
Solution
▸ Select a longer programme.
▸ Select the
▸ Change the level of dryness.
▸ Insert the plug into the mains socket.
▸ Turn the wall switch on.
▸ Check the fuse or circuit breaker.
programme.