V-ZUG Adora TSL WP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. V-ZUG Manuals
  4. Dryer
  5. Adora TSL WP
  6. Operating instructions manual

V-ZUG Adora TSL WP Operating Instructions Manual

Tumble dryer
Hide thumbs Also See for Adora TSL WP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions Manual
V-ZUG Ltd
Tumble dryer
Adora TSL WP
Operating instructions

Advertisement

Table of Contents
loading

Related Manuals for V-ZUG Adora TSL WP

Summary of Contents for V-ZUG Adora TSL WP

  • Page 1 V-ZUG Ltd Tumble dryer Adora TSL WP Operating instructions...
  • Page 2 The model number corresponds to the first 3 digits on the identification plate. These operating instructions apply to the model: Model Type Model no. Adora TSL WP WT-ATSLWPZ Variations depending on the model are noted in the text. © V-ZUG Ltd, CH-6301 Zug, 2010...

  • Page 3: Table Of Contents

    Contents 1 Safety precautions 1.1 Transport ..........5 1.2 Before using for the first time .
  • Page 4 6 Care and maintenance 6.1 Cleaning intervals ......... 44 6.2 Error message A9 .

  • Page 5: Safety Precautions

    Safety precautions The appliance corresponds to recognised technology standards and the relevant safety regulations. Proper use of the appliance is however essential to avoid damage and accidents. Please therefore follow the precautions given in these operating instructions. In accordance with the requirements of IEC 60335-1: •...

  • Page 6: Before Using For The First Time

    1 Safety precautions Before using for the first time Allow the appliance to stand for about 2 hours in the normal operating position. Failure to do so can result in damage to the appliance. • The appliance must be installed and connected to the electricity supply in accordance with the separate installation instructions.
  • Page 7 1 Safety precautions Do not use the appliance to dry the following • Unwashed washing. • Textiles that have been cleaned, treated or soaked with flammable chemicals, detergents or solvents (benzine, alcohol, stain remover, oil, paint, wax, etc). Fire or explosion hazard! Wash materials containing such substances first by hand with water or allow the solvent to evaporate completely.
  • Page 8 1 Safety precautions • Items containing foam rubber (also known as latex foam) or similarly textured rubber like materials should not be dried in a tumble dryer on a heat setting. Foam rubber materials can, when heated, produce fire by spontaneous combustion.

  • Page 9: Children In The Home

    1 Safety precautions Children in the home • Packaging material (e.g. plastic, polystyrene) can be dangerous for children. Danger of suffocation! Keep packaging material away from children. • The appliance is designed for use by adults who are familiar with these operating instructions.

  • Page 10: Note On Use

    1 Safety precautions Note on use Do not use the pivoting operating panel to lift or move the appliance. • Do not use the appliance if visibly damaged or if the inlet pipes are damaged. Contact Customer Services. • If the appliance is not operating properly, disconnect it from the electricity supply immediately.

  • Page 11: Maintenance

    1 Safety precautions Maintenance Ensure the drum has stopped moving before reaching inside. Do not touch the drum while it is still in motion – risk of serious injury! • Disconnect the appliance from the mains before carrying out maintenance work.

  • Page 12: Your Appliance

    Your appliance Appliance description The appliance operates with a closed air circuit. With the help of the heat pump, the moisture is extracted from the air which is then heated up again. Recovering heat in this way sharply reduces energy consumption. The appliance has no electric heating element.

  • Page 13: Construction

    2 Your appliance Construction The appliance door can be set to open to the left or to the right. Our Customer Services can make the necessary adjustments to the appliance. Operating and display elements (pivoting operating panel) The operating panel can be set in one of 3 positions.

  • Page 14: Operating And Display Elements

    2 Your appliance Operating and display elements MIN. Automatic programmes Extra dry Normal dry Iron dry Damp Woollens WetClean Favourites Fabric type Additional programme Timed drying MIN. Additional functions Ultra care Easy care Delayed start End of programme...
  • Page 15 2 Your appliance Display (plain text display) Various information appears in the display during the programme selection and the programme sequence: • Programme name with duration • Moisture level with duration remaining • Additional functions • Delayed start • User settings •...

  • Page 16: Using For The First Time

    2 Your appliance Using for the first time When the appliance is connected to the power supply for the first time, it is possible to select a function test. The purpose of the function test is to check the installation and it lasts about 3 minutes. For the function test the appliance must not to have been standing in the normal operating position for approx.
  • Page 17 2 Your appliance The function test can be interrupted in 2 ways: 1. Open the appliance door. Function test pause – In the display appears: Close appliance door – After closing the appliance door the Function test pause display appears: abort continue 2.

  • Page 18: Select Language For The Display

    2 Your appliance Select language for the display After using for the first time the language must be selected once. It can be changed at any time under SER SETTINGS Press the button repeatedly until the ➤ desired language appears in the display, Deutsch fr/it/rm/...

  • Page 19: Programme Overview

    Programme overview Programme sequence for automatic programmes The drying programme has 3 phases: Drying The washing is tumble dried until it reaches the set level of dryness. The drying programme is monitored by a moisture sensor. As soon as the required level of dryness is reached, the «Cooling down/airing»...

  • Page 20: Automatic Programmes

    3 Programme overview To select the right drying programme, follow the fabric care symbols on garment labels, e.g. Automatic programmes Programme Symbol For thick, multi-layered fabrics and mixed loads. Extra dry Not suitable for knitted or woven articles such as T-shirts and underwear as they could shrink.
  • Page 21 3 Programme overview The stated values for the programme duration and energy apply for the maximum stated capacity with a wash spun at approx. 1000 rpm (corre- sponds to a residual moisture of approx. 60 %). A higher spinning speed and a smaller load reduce them by about 20–30 %.

  • Page 22: Fabric Type

    3 Programme overview Fabric type Airing For refreshing or airing little-worn garments. For drying silk fabrics. Follow the fabric care labels as silk tends to crease easily. Low Silk temperature for gentle drying. Brings the bounce back to woollen textiles. Unload as soon as the programme ends. Fluffing The textiles are not dried! Crease...
  • Page 23 3 Programme overview Capacity Residual moisture Programme duration Energy 2.5 kg – 0h10 0.02 kWh 1.5 kg 0 % to 2 % 0h45 1.10 kWh 1 kg – 0h04 0.10 kWh 1 kg – 0h20 0.03 kWh 7 in total 0 % to 2 % 0h45 1.05 kWh...

  • Page 24: Additional Functions

    3 Programme overview Additional functions Max. Function/symbol load Ultra care Very gentle programme with a lower drying temperature. Particularly 2.5 kg suitable for fine textiles. Easy care Gentle drying for mixed fabrics (e. g. shirts, pullovers, T-shirts). The 2.5 kg level of dryness is reduced.

  • Page 25: Favourites

    3 Programme overview Favourites Simplifies selecting frequently used programmes. You can compile your own favourites. Favourites are easy to start. • A maximum of 3 favourites can be saved. The appliance door has to be open to define, change or delete a favourite.
  • Page 26 3 Programme overview Starting your favourite Close the appliance door. ➤ Press the button repeatedly until the ➤ desired favourite appears in the display, Normal dry 1h25 easy care e.g.: – The programme starts automatically after 20 seconds. Changing your favourite Open the appliance door.
  • Page 27 3 Programme overview Deleting a favourite Open the appliance door. ➤ Press the button repeatedly until the ➤ favourite to be deleted appears in the Normal dry 1h25 easy care display, e.g.: Hold the button depressed for about ➤ clear? YES: 3 seconds.

  • Page 28: User Settings

    User settings Providing no programme is running and no error message is displayed, the user settings can be changed with the appliance door open or closed. The procedure is generally the same for all settings. Changing user settings Hold the button depressed for ➤...
  • Page 29 4 User settings The following diagram gives an overview of the possible user settings. ➤ Hold button depressed for 5 seconds User settings FNXXX XXXXXX • Text in Deutsch • Texte en français Language D/F/I/R/E • Testo in italiano English •...

  • Page 30: Language

    4 User settings Language The language in the display is selected after using for the first time under and can be changed at any time, as ELECT LANGUAGE FOR DISPLAY described in this section. Changing the language Hold the button depressed for ➤...

  • Page 31: Level Of Dryness

    4 User settings Level of dryness The appliance is designed to provide the most energy-efficient drying. The moisture sensor continually monitors the level of dryness of the washing. If the washing is not being dried sufficiently – or being overdried – the level of dryness can be reset.

  • Page 32: Childproof Lock

    4 User settings Childproof lock The childproof lock is to prevent small children accidentally starting or stopping a programme. When the childproof lock is on, a programme can only be started by pressing two buttons simultaneously. Switching the childproof lock on/off Hold the button depressed for ➤...

  • Page 33: Brightness

    4 User settings Brightness This function can be used to change the display contrast between the text and the background. Changing the brightness in the display Hold the button depressed for ➤ User settings FNXXX XXXXXX 5 seconds. Press the button repeatedly until the ➤...

  • Page 34: Restoring Factory Settings

    4 User settings Restoring factory settings The factory settings can be restored. Any favourites that have been saved will be deleted. Hold the button depressed for ➤ User settings FNXXX XXXXXX 5 seconds. Press the repeatedly until in the display ➤...

  • Page 35: Drying

    Drying Preparing the appliance After the appliance is transported or re-sited it must be left standing in the normal operating position for approx. 2 hours. Failure to observe this can result in damage to the appliance. Plug the appliance in at the mains or turn ➤...

  • Page 36: Programme Selection

    5 Drying Programme selection «Tip and go» An automatic programme can be selected with the press of a single button. All the necessary settings for the programme are made automatically. Additional functions can be selected or deselected by pressing the corre- sponding button.
  • Page 37 5 Drying Selecting an automatic programme Close the appliance door. ➤ – The indicator lights for the programme selection buttons and the additional programme flash. MIN. Press the required programme selection button. ➤ – The indicator light for the programme selected illuminates. –...
  • Page 38 5 Drying Selecting timed drying Close the appliance door. ➤ – The indicator lights for the programme selection buttons and the additional programme flashes. MIN. Press the button. ➤ MIN. Press repeatedly to select desired duration, i.e. 10, 20, 30, 40, 50, 60 or ➤...

  • Page 39: Changing Selection

    5 Drying Selecting delayed start MIN. Hold button pressed immediately after the programme selection, or ➤ keep pressing it until the desired delayed start duration shows in the display (max. 24 hours). – The display goes dark. – After the desired delayed start period is up, the programme selected starts automatically.

  • Page 40: Interrupting A Programme

    5 Drying Interrupting a programme A running programme can be interrupted at any time to add/remove an item of washing before time. After closing the appliance door the heat pump starts after a waiting time of 10 minutes and the programme duration is lengthened corre- spondingly.

  • Page 41: Programme Selection With Childproof Lock Activated

    5 Drying Programme selection with childproof lock activated Close the appliance door. ➤ Press the desired programme selection button. ➤ In this example: Childproof lock – In the display appears: – The indicator lights for the programme selection buttons flash. Hold the programme selection button depressed and at the same time ➤...
  • Page 42 5 Drying Programme abort through door opening Open the appliance door. ➤ – The running programme is interrupted. Hold the activated programme selection button – the indicator light is ➤ illuminated – depressed and at the same time press the button.

  • Page 43: End Of Programme

    5 Drying End of programme End of programme – In the display appears: Clean filter in door – The indicator light for the programme that has finished illuminates. – The indicator light for the button flashes. «Crease guard» starts if the appliance is not unloaded straightaway. When it has finished, the indicator lights and display go out.

  • Page 44: Care And Maintenance

    Care and maintenance To minimize the risk of fire hazard regularly clean the filters! Cleaning intervals Pos. Part Cleaning intervals Cleaning each time after a drying remove any fluff programme Door filter whenever there is a using an abrasive liquid cleaning agent and a heavier build-up of sponge, rinse with water and allow to drip dry;...

  • Page 45: Error Message A9

    6 Care and maintenance Error message A9 A9 Mesh and filter clean A thick coating of fluff results in a reduced process air flow which can impair the drying process and activate fault message «A9 Mesh and filter clean». Check and, if necessary, clean the following parts in the appliance: •...

  • Page 46: Cleaning The Door Filter

    6 Care and maintenance Cleaning the door filter each time after a drying programme Open the appliance door. ➤ Lift the door filter 1 out. ➤ Remove any fluff. ➤ Hold door mesh filter up to the light to detect ➤...

  • Page 47: Clean The Base Cassette

    6 Care and maintenance Clean the base cassette as required Open the appliance door. ➤ Open the cover 1 by pressing the release ➤ catch 2. Remove the cassette in base 3. ➤ Remove fluff from the base mesh filter in ➤...

  • Page 48: Cleaning The Filter Mat

    6 Care and maintenance Cleaning the filter mat Clean filter mat in base mesh filter every six months Never operate the appliance without the filter mat. A spare filter mat is included in the service set supplied. Open the appliance door. ➤...

  • Page 49: Cleaning The Moisture Sensor

    6 Care and maintenance Cleaning the filter mat in front of the heat pump as required Never remove the filter mat. If the «A9 Mesh and filter clean» error message still appears after the filters and the filter mat have been cleaned, clean the filter mat in front of the heat pump very carefully using a vacuum cleaner.

  • Page 50: Trouble-Shooting

    Trouble-shooting This section lists problems which you can resolve simply yourself by following the instructions given. If any other error messages appear or if you are unable to resolve the problem, call Customer Services. Before calling Customer Services, please note down the error message in full (message, (FN) serial number F..
  • Page 51 7 Trouble-shooting A3 Moisture sensor … appears clean Possible cause Solution • The moisture sensor is Clean the moisture sensor and then wipe ➤ dirty or wet. dry. Cancel the error message by pressing the ➤ button. Start the programme. ➤...
  • Page 52 7 Trouble-shooting F.. see instructions … appears FNXXX XXXXXX EXXX Possible cause Solution • Various situations can Cancel the error message by pressing the ➤ lead to an «F» error button. message. Switch mains supply off for approx. ➤ 1 minute, then switch back on. Select a programme.
  • Page 53 7 Trouble-shooting Insert base cassette … appears with filter in base Possible cause Solution • The following parts in the Insert parts correctly. ➤ appliance have not been Close the cover. ➤ inserted properly: – Cassette in base – Mesh filter in base –...
  • Page 54 7 Trouble-shooting … the washing is not dry enough Possible cause Solution • The load contains Select a longer programme. ➤ different types of fabric. Select the programme. ➤ MIN. Change the level of dryness. ➤ • An interruption in the Plug in at the mains.
  • Page 55 7 Trouble-shooting … the washing is charged with static electricity Possible cause Solution • Wash items that are made Static charge is a normal characteristic of of man-made fibres. man-made fibres and nothing to do with the appliance. … the duration remaining indicator remains frozen for a longer period Possible cause Solution •...

  • Page 56: Drying Tips

    Drying tips Fabric care symbols To select the right drying programme, follow the fabric care symbols on garment labels. Tumble dry, medium heat Tumble dry, low heat Do not tumble dry General tips • For the wash you are recommended not to use fabric conditioners or other fabric care solutions, otherwise comply with the manufacturer’s instruc- tions.
  • Page 57 8 Drying tips • Woollen and silk fabrics often carry the «Do not tumble dry» label. For woollen and silk fabrics, follow the fabric care symbols on garment ➤ labels. Press the button and select the relevant programme. ➤ • For easy-care fabrics (e.g. shirts and cotton mixed fabrics), additionally select the easy care function and put only a few items in the drum.

  • Page 58: Spare Parts

    Spare parts Please give model number and exact description when ordering parts. Door filter Mesh filter in base Filter mat in base mesh filter (2 items) Cassette in base for mesh filter in base and filter mat...

  • Page 59: Technical Data

    Technical data Dimensions Height: 85 cm Width: 60 cm Depth: 60 cm Weight: 65 kg Dry load capacity: 6 kg Ambient conditions Permissible room temperatures when appliance in operation 5 °C to 35 °C Electrical connection See identification plate ➤...

  • Page 60: 10.1 Notes For Testing Institutes

    10 Technical data 10.1 Notes for testing institutes The correct determination of the declaration data is given with wash item ➤ after an intake phase of 5 complete drying programmes (Automatic programme: Normal drying Wash the base mesh filter in the base cassette after every drying ➤...

  • Page 61: Disposal

    Disposal Packaging • All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS)) are marked and should, if possible, be collected for recycling and disposed of in an environmentally friendly way. Disconnection • Disconnect the appliance from the mains. With a fixed appliance, this is to be carried out by a qualified electrician! Safety •...

  • Page 62: Notes

    Notes...
  • Page 63 12 Notes...

  • Page 64: Index

    Index Additional functions..14, 24 Damp ..... . . 20 Additional programme..14 Delayed start.
  • Page 65 13 Index Fabric care symbols ... 56 Normal dry....20 Fabric conditioners ... . 56 Notes for testing institutes .
  • Page 66 13 Index Technical data....59 Validity ..... . . 2 Testing institutes Notes .

  • Page 67: Repair Service

    Repair service section will help you to carry out small ROUBLE SHOOTING repairs yourself, saving you the time and trouble of calling out a service technician and the cost that goes along with it. Whether you contact us about a malfunction or an order, please always state the serial number (FN) and the model type of your appliance.
  • Page 68 When you have finished washing for the day: Clean the door filter ➤ Check the mesh filter in base and the cassette in base and clean it if ➤ necessary Close the appliance door ➤ V-ZUG Ltd Industriestrasse 66, CH-6301 Zug vzug@vzug.ch, www.vzug.com J959.360-2...

Table of Contents