PROAIM Cambird Pro SL-CBPR-01 Instruction Manual page 8


For slow sliding movements, you may insert Crank Handle into the crank spline on Slider.
NOTE: Remove Crank Handle when not in
use while operating, as it will cause shaking
of Slider Rail.
Assembling as Diagonal Slider

To give angle to rail for Diagonal Slides,
move the camera to middle of the rail
and apply the Slide Brake.

Loosen the black knob on each side of rail system. Place the rail at desired position. Then
re-tighten the knobs.
knob
8
Slide brake