PROAIM Cambird Pro SL-CBPR-01 Instruction Manual page 11


Attach other side of Parallelogram/Jib Arm to the camera platform by inserting connected
lever into threaded hole on platform.
NOTE: The connected lever should be perpendicular to rail. This will ensure camera
movement parallel to the ground.

You may need to adjust the length of Jib
Arm to adjust framing. Use the adjusting
hand grip on Jib arm to accomplish this.

Complete the tightening process with
knob. Ensure that the teeth in middle of
camera platform are fully disengaged
and that the nipples on arm's lever have
fully met the holes on platform.
11