PROAIM SL-CNL Assembly Manual

Curve-n-line camera video slider

Curve-N-Line Camera Video Slider

(SL-CNL)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

NOTE: The slider is available in 2ft, 3ft and 4ft. You will get the slider according to your purchase.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SL-CNL and is the answer not in the manual?

Page 1 Curve-N-Line Camera Video Slider (SL-CNL) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Curve-N-Line Camera Slider (Straight) Setup • Loosen the knobs of both the end feet to adjust them as per your requirement. • You can also screw in the camera directly on the camera mounting plate. • For Camera fluid head setup, screw the fluid head (Not Included) onto the camera...
Page 3 • Loosen the silver side knob of the camera plate to slide it. YOUR PROAIM CURVE-N-LINE CAMERA SLIDER ALL DRESSED UP AND GOOD TO GO If you wish to use the slider as a curve slider, follow these steps: •...
Page 4 • Re-attach the camera plate on the curve slider and tighten the silver knob. YOUR PROAIM POLESTAR DOLLY ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.