PROAIM SL-WG Assembly Manual

Wigo portable camera slider

Wigo Portable Camera Slider

(SL-WG)

A s s e m b l y M a n u a l

Available Sizes: 9",12",15"

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Wigo Slider

Storage Pouch

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SL-WG and is the answer not in the manual?

Page 1 Wigo Portable Camera Slider (SL-WG) A s s e m b l y M a n u a l Available Sizes: 9",12",15" What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Camera Slider Setup  Mount the Wigo slider onto the tripod and rotate it till it's tight. Attach your fluid head (Not-Included) onto the camera platform. Again, turn it till it's tight.  Attach your camera to the fluid head and tighten the knob to secure it properly.
Page 3 NOTE: Do not put much pressure on the sides, and do not over tighten the screws. YOUR PROAIM WIGO PORTABLE CAMERA SLIDER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.