Table of Contents
Advertisement
IridiTRAK Installation & User Manual
Specifications
General Functional Specifications
Electrical
Power (DC)
Plug-pack
(if required / ordered separately)
Power Consumption (Average)
Idle (registered) Mode
Transmit Mode
Sleep Mode
User Interface I / O (Inputs / Outputs)
2 x Alarm Loops
(2 inputs, and 2 outputs)
Ignition/Key/Accessory Sense,
and ON/OFF inputs
Additional Interface
USB Config Port
9 to 32VDC, 2A
90-250VAC, 50/60Hz input
1.5 Watt
1.8 Watt
[Eg. When using an 11V input, typical current of 130mA
(average) when registered/locked, and 160mA (average) whilst
transmitting]
20mA Current (0.02A)
Alarm Mode:
"Normally-Closed" Loop IN to OUT
Up to 500m cable run / multiple buttons.
(0 to 32Vdc Tolerant)
High (1) > +7Vdc
Low (1) 0V < +1Vdc
5-pin Mini-B Female socket.
Suits standard "5-pin-Mini-B-Male to A-Male" USB cable.
Page 41 of 46
Advertisement
Table of Contents
