Table of Contents
Advertisement
IridiTRAK Installation & User Manual
MT (Mobile Terminated) Remote Commands Format
The BEAM IridiTRAK is designed to handle remote configuration and control
commands via SBD/email.
The remote configuration options allow you to control many settings. This enables
you to make changes to setting durations, clearing alerts, sending acknowledgement
and remote polling.
To configure your RST remotely you will need to know its IMEI and Supervisor PIN.
The basic format for remote commands are as follows.
LTK <response location> @<supervisor pin> <command> <command>...
For example: LTK SBD @3170 A
SBD.
Remote Command Listing
Function
Equation Processing
Status
Position Reports Time
Emergency Message
Time
Time before going to
Sleep
Server Acknowledgement N/A
Turn OFF Emergency
Remote Polling
This would return the status information via
Query Command
71
A
731
732
733
N/A
N/A
Page 30 of 46
Update Command
71y – Turn on
71n – Turn off
N/A
731[value]
Value: Numeric value no
greater then 64bits.
732[value]
Value: Numeric value no
greater then 64bits.
733[value]
Value: Numeric value no
greater then 64bits.
723y
Note: Use NOREP in
<response location>
725y
Note: Use NOREP in
<response location>
726y
Note: Use NOREP in
<response location>
Advertisement
Table of Contents
