Table of Contents
Advertisement
IridiTRAK Installation & User Manual
Alert LED Status
External Alert LED
If the Alert LED is installed to pins 9 and 10 on the I/O connector, it will function as
follows:
1. ON:
When alarm has been triggered and the unit is trying to send message.
2. Flashing Slowly:
When Emergency Message has been sent from the unit.
3. Flashing Quickly:
After the network server has acknowledged that the message was received.
4. OFF:
When the unit has been sent a command to reset the Emergency, and re-arm
itself for next alarm detection.
Page 27 of 46
Advertisement
Table of Contents
