Settings; Settings - Limits - rotork IQ Range Full Configuration, Status And Monitoring User Manual

2. Settings

Settings
Limits
Indication
Control
ESD
Security
Defaults
2. Settings Menu
2.1 Limits
2.2 Indication
2.2.1 Contacts
2.2.2 Local Display
2.2.3 Analogue
2.3 Control
2.3.1 Local Control
2.3.2 Remote Control
2.3.3 Interrupter Timer
2.4 ESD
2.5 Security
2.6 Defaults
8
IQ3 Full Configuration Manual - Section: Settings
2.1

Settings - Limits

Limits
Indication
Control
ESD
Security
Defaults
Page
8
Direction
11
Action
11
Torque
Set Limit
12
14
Action
Torque
14
Set Limit
15
Turns
Position
16
Speed
31
Opening
32
OP Bypass Pos
34
Closing
CL Bypass Pos
35
* IQT builds only
The Limits page is shown above with the default settings.
Close Settings
1/15 Close Direction
Sets the output rotation direction required to close the valve.
Using the handwheel, manually operate the actuator to establish
valve closing direction.
Clock (default) - clockwise rotation of the actuator closes the
valve.
Anti - anti-clockwise (counter clockwise) rotation of the actuator
closes the valve.
To change,
closing direction.
2/15 Close Action
The actuator can be configured to close on torque for seating
valve types or limit for non-seating valve types.
Refer to Valve manufacturer for recommended setting.
In the absence of valvemaker instruction refer to the
following table:
Settings
Close Settings
Clock
Limit
Open Settings
Limit
14.9
49.6
*
Torque Limit Bypass
On
On
. The checkbox will indicate the set
Anti
Torque
40%
Torque
40%
90%
Off
5%
Off
95%
1/15