SmartPay PAX D210 Quick Reference Manual

Thank you for choosing Smartpay
The D210 provides a smart, secure and mobile payment terminal. It connects to the internet via your Wi-Fi internet connection.
Complete these simple steps to get your
terminal connected, ready to take a payment.
STEP ONE: Switch on
1. Turn on the terminal by holding the
the terminal. The terminal will go through a start up sequence.
STEP TWO: Connect to the Wi-Fi
Terminal will attempt to connect to last Wi-Fi network. Make
sure the terminal is in range of your Wi-Fi network, you will be
prompted to connect/configure a network connection.
1. Press CLEAR to change your Wi-Fi network
2. Press ENTER to scan for network connections
3. Select the Wi-Fi network you wish to connect to
4. Enter the Wi-Fi password
If successful, the icon lights up in the top left corner of the screen.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.

Charging the terminal

You can charge the terminal by plugging it into the mains power. It will take approx. 3 hours for a full charge. It can also be charged
using a car charger accessory or spare batteries are available depending on your needs.
You can purchase these through our online store smartpay.co.nz/store.

Integrated EFTPOS?

If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to the Integration Set Up Guide included with your
terminal.
To download the full user guide visit smartpay.co.nz/guides
This contains instructions on care for your terminal, loading
paper and full functionality details.
Getting Started Guide |
button on the side of
Smartpay PAX D210
What's in the box
*
D210 Terminal Pre-loaded
base unit paper roll
*If this is a replacement terminal you may need to use the cables from your existing terminal.
STEP THREE: Connect to the Paymark network
You terminal should be already connected, however if you are
replacing an existing terminal you'll need to call us before you can
transact.
Call the Smartpay Technical Support Team on 0800 476 278. We
will release the security keys and perform your initial login.
Need help?
Get help online at: smartpay.co.nz/help
View the full user guide for your terminal at:
smartpay.co.nz/guides
Call our Technical Helpdesk on 0800 476 278
Contact your bank to enable/disable card types, electronic
vouchers (offline mode) or contactless.
Contact Paymark to change your business name on your receipt.
Return courier
Charging cable
label