SmartPay PAX S900 Quick Reference Manual

Thank you for choosing Smartpay
The S900 is a secure and robust mobile payment terminal. It connects to the internet via a GPRS/3G data sim card.
Complete these simple steps to get your terminal
connected, ready to take a payment.

STEP ONE: Switch on

Turn on the terminal by holding the
terminal will go through a start up sequence.

STEP TWO: Connect to the Paymark network

Your terminal arrived with a printed receipt still attached:
1. If the receipt is a short receipt with your business name on it,
you are now all ready to go.
2. If not, you'll need to call us before you can connect. Call
Smartpay Technical Support Team on 0800 476 278. We will
release the security key and perform your initial logon.

Charging the terminal

You can charge the terminal by plugging it into the power. On mains power with the charging accessory provided it will take approx.
3 hours for a full charge. We also have car chargers or spare batteries available depending on your needs. Please contact our team on
0800 476 278 if you think you need these.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Need help?
Get help online at: smartpay.co.nz/help
View the full user guide for your terminal at:
smartpay.co.nz/guides
Call our Technical Helpdesk on 0800 476 278.
Contact your bank to enable/disable card types, electronic
vouchers (offline mode), contactless
Contact Paymark to change your business name on your receipt

Getting Started Guide |

button on the terminal. The
Smartpay PAX S900
What's in the box
*
Terminal base
Power supply
unit
*If this is a replacement terminal you may need to use the
cables from your existing terminal.
Sim card
(installed)
Integrated EFTPOS?
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to the Integration Set Up Guide included with your
terminal.
To download the full user guide visit: smartpay.co.nz/guides
This contains instructions on care for your terminal, loading
paper and full functionality details.
Pre-loaded Return courier
paper roll label