SmartPay PAX S80 Getting Started Manual

Thank you for choosing Smartpay
The S80 and S300 PIN pad combo is a secure, robust and customer friendly approach to transactions. It utilises a base terminal for the
merchant and a PIN pad for the customers.
What's in the box
*
S80 Terminal base unit S300 PIN pad terminal
Ethernet and/or phone
Return courier label
cable
Ports to look out for on the terminal
STEP TWO: Switch on
1. Plug in the power supply to the electrical
power socket.
2. Turn on the power at the wall, then push and
briefly hold the button on the terminal. The
terminal will go through a start-up sequence.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Integrated EFTPOS?
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to our integration set up guide on our website
smartpay.co.nz/guides
Getting Started Guide |
Power supply
*If this is a replacement
terminal you may need to
use the cables from your
existing terminal.
STEP THREE: Connect to the Paymark network
1. Your terminal arrived with a printed receipt still attached. If the receipt is short
2. If not, you'll need to call us before you can transact. Call our technical support
Smartpay PAX S80 + S300 Combo
Complete these simple steps to get your terminal
connected, ready to take a payment.
STEP ONE: Plug in
You might find it easiest to have base unit face down on the counter
to do these steps.
1. Put the round end of the power cable into the POWER socket on
the terminal
2. Plug in the cable from your S300 into the PIN PAD port
3. If you're using a broadband or fibre internet connection, plug your
ethernet cable into the LAN/ RS232B port
If you use a dial-up internet connection or dial-backup, plug the
phone cable into the LINE port
4. Tuck the cables into the recessed cable tidy guides on the bottom
of the base unit
with your business name on it, you are now all ready to go.
team on 0800 476 278 and we will get your ready to take payments.
Need help?
Get help online at: smartpay.co.nz/help
Call our Technical Helpdesk on 0800 476 278.
To download the full user guide visit smartpay.co.nz/guides
Contact your bank to enable/disable card types, electronic
offline vouchers (EOV) or contactless.
Contact Paymark to change your business name on your receipt.