SmartPay PAX D210E Getting Started Manual

Thank you for choosing Smartpay
The D210E is a secure, stylish and mobile payment terminal. It connects to the internet via a GPRS/3G data sim card, Wi-Fi or ethernet.
Complete these simple steps to get your terminal
connected, ready to take a payment.

STEP ONE: Switch on

Turn on the terminal by holding the
The terminal will go through a start up sequence.

STEP TWO: Connect to the Cuscal network

Your terminal should already be connected, however if you are
replacing an existing terminal you'll need to call us before you
can transact. Call our technical support team on 1800 433 876
and we will guide you through the rest.

Charging the terminal

You can charge the terminal by plugging the cable directly into the terminal.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Need help?
To download the full user guide visit smartpay.com.au/guides
This contains instructions on care for your terminal, loading paper and full functionality details.
Get help online at: smartpay.com.au/help
View the full user guide for your terminal at: smartpay.com.au/guides
Call our Technical Helpdesk on 1800 433 876.
Contact your bank to enable/disable card types, electronic vouchers (offline mode), contactless
Contact Paymark to change your business name on your receipt
Getting Started Guide |
button on the terminal.
Smartpay PAX D210E
What's in the box
*
D210E Terminal
Charging cable
unit
*If this is a replacement terminal you may need to use the cables from your existing terminal.
Pre-loaded Return courier
paper roll label