SmartPay PAX S920 Getting Started Manual

Thank you for choosing Smartpay
The S920 is a secure, stylish and mobile payment terminal. It connects to the network via a GPRS/3G data sim card or Wi-Fi.
(you will need to call us to enable your GPRS network connection)
Complete these simple steps to get your terminal
connected, ready to take a payment.

STEP ONE: Switch on

Turn on the terminal by holding the
terminal will go through a start up sequence.

STEP TWO: Connect to the Wi-Fi

1. Follow the prompts on screen to search for your Wi-Fi
network
2. Select the Wi-Fi network you wish to connect to.
3. Enter the Wi-Fi password.
(To key in characters, press the number key that represents the
letter and press ALPHA until your character appears)
4. Once connected the Wi-Fi symbol and signal strength icon
will light up.

Charging the terminal

You can charge the terminal by plugging it into the power. On mains power with the charging accessory provided it will take approx.
3 hours for a full charge. You can also use a standard USB car charger with micro USB cable to charge the terminal while you're on the
go. There is a mains powered charging cradle accessory available depending on your needs. Please Contact our team on 0800 476 278
if you would like to order this.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Integrated EFTPOS?
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
To download the full user guide visit smartpay.co.nz/guides
This contains instructions on care for your terminal, loading
paper and full functionality details.
Getting Started Guide |
button on the terminal. The
Smartpay PAX S920

STEP THREE: Connect to the Paymark network

1. Your terminal arrived with a printed receipt still attached. If
the receipt is shortwith your business name on it, you are now
all ready to go.
2. If not, you'll need to call us before you can transact. Call our
technical supportteam on 0800 476 278 and we will get your
ready to take payments.
What's in the box
*
S920 Terminal
Power supply
base unit
*If this is a replacement terminal you may need to use the cables from your existing terminal.
Need help?
Get help online at: smartpay.co.nz/help
Call our Technical Helpdesk on 0800 476 278.
Contact your bank to enable/disable card types, electronic
offline vouchers (EOV), contactless.
Contact Paymark to change your business name on your receipt.
(Wi-Fi)
Pre-loaded Return courier
paper roll label