SmartPay PAX S900 Getting Started Manual
Hide thumbs Also See for PAX S900:

Advertisement

Quick Links

Thank you for choosing Smartpay
The S900 is a secure and robust mobile payment terminal. It connects to the network via a GPRS data SIM card.
Complete these simple steps to get your terminal
connected, ready to take a payment.

STEP ONE: Switch on

Turn on the terminal by holding the
terminal will go through a start up sequence.

STEP TWO: Connect to the Paymark network

1. Your terminal arrived with a printed receipt still attached. If
the receipt is short with your business name on it, you are
now all ready to go.
2. If not, you'll need to call us before you can transact. Call our
technical support team on 0800 476 278 and we will get your
ready to take payments.

Charging the terminal

You can charge the terminal by plugging it into the power. On mains power with the charging accessory provided it will take approx.
3 hours for a full charge. We also have car chargers or spare batteries available depending on your needs. Please contact our team on
0800 476 278 if you think you need these.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Integrated EFTPOS?
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to our integration set up guide on our website
smartpay.co.nz/guides
Getting Started Guide |
button on the terminal. The
Smartpay PAX S900
What's in the box
*
Terminal base
Power supply
unit
*If this is a replacement terminal you may need to use the
cables from your existing terminal.
SIM card
(installed)
Need help?
Get help online at: smartpay.co.nz/help
Call our Technical Helpdesk on 0800 476 278.
To download the full user guide visit smartpay.co.nz/guides
Contact your bank to enable/disable card types, electronic
offline vouchers (EOV) or contactless.
Contact Paymark to change your business name on your receipt.
Pre-loaded
Return courier
paper roll
label

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PAX S900 and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartPay PAX S900

  • Page 1 (rather than the idle screen as shown on the reverse of this guide). Call our Technical Helpdesk on 0800 476 278. Please refer to our integration set up guide on our website To download the full user guide visit smartpay.co.nz/guides smartpay.co.nz/guides Contact your bank to enable/disable card types, electronic offline vouchers (EOV) or contactless.
  • Page 2 Check the paper rolls have been put in the right way up. Manual Log On: ALPHA > 1 Make sure the printer cover is tightly closed. Reprint last receipt: ALPHA > 2 Settlement inquiry: ALPHA > 3 smartpay.co.nz | 0800 476 278...

Table of Contents