Initialization - DMP Electronics iComSL Series Installation And Programming Manual

InItIalIza tIon
6.1

INITIALIZATION

6.2
NO
CODES?
SURE? YES
6.3
NO
SCHEDS?
SURE? YES
6.4
EVENTS? NO
SURE? YES
6.5
NO
ZONES?
SURE? YES
6.6
COMMS? NO
SURE? YES
6.7
DEFAULTS? NO
SURE? YES
Digital Monitoring Products
10
Initialization
This function allows you to set the communicator's programmed memory back to the
factory defaults in preparation for system programming.
After you select YES to clear a section of memory, the communicator asks if you are sure
you want to clear the memory. This is a safeguard against accidently erasing part of your
programming. No memory is cleared from the programming until you answer YES to the
SURE? YES NO prompt.
For each section of the panel program you can
initialize, a NO or YES option is provided.
CODES? NO
Selecting NO
advances you to
the next prompt.
SCHEDS? NO
Clear All Codes
YES
NO leaves existing codes intact.
NO
YES clears the user code memory and assigns the user code number 99 to user 20.
Clear All Schedules
YES
NO - Leaves existing schedules intact.
NO
YES - Clears all schedules from the programming.
Clear Events
YES
NO leaves existing event memory intact.
NO
YES clears all event memory currently held in the communicator's Display Events buffer.
Clear Zone Programming
YES
NO leaves existing zone information intact.
NO
YES sets all zones in the system to * UNUSED *
Clear Communication
YES
NO NO - Leaves existing communication programming intact.
YES - Clears communication to factory defaults.
Set to Factory Defaults
YES
NO
NO leaves the remainder of the existing communicator programming intact.
YES sets the communicator programming back to factory default selections and clears
all Z-Wave device programming and Favorites from the communicator. Selecting YES
does not clear the event memory, zone, user code information, or schedules.
Initialization
YES
Selecting YES advances you to
a confirmation prompt.
SURE?
If you select YES, the panel initializes that section of
the program and advances you to the next prompt.
If you select NO, the panel advances you to the next
YES
section prompt but does not initialize that section of
the program.
iComSL Series Universal Communicator Installation and Programming Guide
YES NO