Design And Function; General; Product Identification; Name Plate - ABB TTF200 Operating Instructions Manual

TTF200 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF200-EN REV. B

3 Design and function

General

TTF200 digital transmitters are communication-ready devices
with microprocessor-controlled electronics.
For bidirectional communication, the 4 to 20 mA output signal is
superimposed with an FSK signal in accordance with the HART
standard.
The transmitters can be configured, polled, and tested using a
DTM, an EDD or using the Field Information Manager (FIM).
Handheld terminals can also be used for communication
purposes.
As an option, the transmitter can be fitted with the type BS LCD
indicator. The LCD indicator is used to visualize the current
process values.
Note
A configuration of the TTF200 with the type B LCD indicator with
the configuration function used in the TTF300 is not possible.
1 Supply voltage cable
2 TTF200 transmitter
3 Temperature sensor
Figure 8: Setup of the TTF200
4 Process pipe
5 Sensor connection cable

4 Product identification

Name plate

Note
Products that are marked with the adjacent symbol
may not be disposed of as unsorted municipal waste
(domestic waste).
They should be disposed of through separate
collection of electric and electronic devices.
Note
The ambient temperature range specified on the name plate
refers only to the transmitter itself and not to the measuring
element used in the measuring inset.
1 Manufacturer, manufacturer
address, country of
manufacture, manufacturing
year - week
2 Safety integrity level, SIL logo
(optional)
3 CE mark (EU conformity), if not
on additional plate
4 Type designation / model
5 Transmitter communications
protocol (HART)
6 2D barcode for serial number in
accordance with order
7 IP rating of the housing
8 Software revision (SW),
hardware revision (HW)
9 'Follow product documentation'
symbol
j Client configuration:
set measuring range of the
transmitter
Figure 9: Name plate (example)
k Client configuration:
set sensor type and circuit type
l Ambient temperature range, on
additional plate for Ex versions
m Transmitter specification
(supply voltage range, output
current range, communications
protocol)
n 7-digit serial number of the
device electronic unit
o Device order coding:
contains coding of type of
protection, housing/indicator,
cable entry and communications
protocol
p Serial number of the device
(serial number in accordance
with order)
13