Write Configuration Information Using An Editor - Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W User Manual

Write configuration information using an editor.

1. Connect the USB memory your PC.
2. Description of configure file.
You can create a description file in Windows notepad.
The following is a description of the format.
Format
----------------------------------------------------------------
silex
Wireless Mode = 1
SSID = GROUP
Channel = 11
USE WEP = 0
WEP Key = 00000000000000000000000000
DHCP/BOOTP = 1
RARP = 1
IP Address = 0.0.0.0
Subnet Mask = 0.0.0.0
Default Gateway = 0.0.0.0
----------------------------------------------------------------
- You should write silex in first line of the file.
- A file edited incorrectly in notepad may be not supported.
- Each parameter is specified by parameter name = parameter and enter.
Configure
Wireless
TCP/IP
- The function is limited in using USB memory.
Appendix
Users Manual CX2
Name
Wireless Mode
SSID
Channel
USE WEP
WEP Key
DHCP/BOOTP
RARP
IP Address
Subnet Musk
Default Gateway 0.0.0.0-255.255.255.255
Parameter
0:OldAdHoc, 1:AdHoc, 2:Infra
1--14
0:NONE, 1: 64bit, 2:128bit
10 or 26 line hex(0-9, a-f)
0:Desable, 1:Enable
0:Desable, 1:Enable
0.0.0.0-255.255.255.255
0.0.0.0-255.255.255.255
9