Table of Contents
Advertisement
3. Select Create a new port in Select a
Printer Port and create a new port.
Select LPR Port and click Next.
- If the destination print port was
created when installing the PRICOM,
s e l e c t t h e p o r t f r o m U s e t h e
following port and click Next.
4. At Name or address of server
providing lpd, type in the IP address
which was set to the PRICOM. At
Name of printer or print queue on
that server, add lp and click OK.
5. At Install Printer Software, select the
printer driver to be used. Click Next.
6. If Use existing Driver appears, select
Keep existing driver (recommended)
or Replace existing driver. Click
Next.
Appendix
Users Manual CX2
22
Advertisement
Table of Contents
Need help?
Do you have a question about the Print/Scanner/Storage Wireless Server PRICOM C-6400W and is the answer not in the manual?
Questions and answers