Summary of Contents for Silex technology PRICOM SX-300U
Page 1
1. Introduction Thank you for purchasing our product. This manual provides information on how to configure and use PRICOM SX-300U (PRICOM). To correctly and safely use PRICOM please read carefully. PRICOM is a mini print server that connects to a printer using a USB cable. PRICOM can be used anywhere from a small-scale network environment to a large-scale network environment where two or more network protocols are intermingled.
Page 2
PC, upgrades, etc. - This manual has been edited very carefully. However, silex technology, Inc. is not responsible for any mistakes included in this manual or any damages, direct or indirect, arising from the use of this manual.
Page 3
Users Manual SX Safety Instructions - To ensure safe and proper use, please read the following information carefully before using PRICOM. The safety instructions include important information on safe handling of the product and on general safety issues. - This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries or material damage.
Page 4
Users Manual SX Danger Warning about physical connections Do not allow physical impact: When damaged, unplug PRICOM from power and contact your dealer. Failure to take this action could cause fire or an electrical shock. Keep the cord and cables away from children. They may be injured or receive a shock If PRICOM is detached from the device(s), unplug the power to the device(s) before reconnecting.
Page 5
Users Manual SX Danger The following warnings should be observed during use. Do not disassemble or modify the cover of PRICOM. Do not use PRICOM with the case removed. You may receive an electric shock. Do not attempt to check, adjust or repair PRICOM by yourself. You may receive an electric shock.
Page 6
Users Manual SX Warning Warning about physical connections When unplugging PRICOM, do not pull on the cord. The cord may break resulting fire and/or electric shock. Pull on the plug only. Do not put PRICOM on an unstable location. The product may fall causing injury or damaging the product.
Page 7
Users Manual SX Warning The following warnings should be observed during use. When the product will not be used for an extended time, disconnect and unplug the power cable. Verify all cables are connected properly before using PRICOM. Introduction...
Need help?
Do you have a question about the PRICOM SX-300U and is the answer not in the manual?
Questions and answers