Table of Contents
Advertisement
Quick Links
I. Introduction
Thank you for purchasing PRICOM print server.
This manual provides complete information on how to setup and use PRICOM C-700/C-
5100/C-6100U/C-6200U safely. Please read this manual carefully before using the
product. This manual is edited commonly for the three products and there are some
parts not applied for your PRICOM.
PRICOM print servers provide network connectivity for your printers.
PRICOM is compatible with status monitor of Canon printer driver. You can check the
printer status that is connected to the network at real time on the screen of your computer.
<PRICOM C-700/C-5100/C-6100U/C-6200U>„
Supported Protocol: TCP/IP and IPX Peer to Peer*
Supported OS: Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP.
*IPX Peer to Peer is an original protocol developed by silex technology, Inc.
-PRICOM C-700
10BASE-T compatible print server, which can be connected directly to parallel interface
port.
-PRICOM C-5100
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
directly to parallel interface port.
-PRICOM C-6100U
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
to USB interface port.
-PRICOM C-6200U
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
to USB interface port.
Introduction
Users Manual CX
1-1
Advertisement
Table of Contents
Related Manuals for Silex technology PRICOM PRICOM C- 5100
Summary of Contents for Silex technology PRICOM PRICOM C- 5100
- Page 1 Supported Protocol: TCP/IP and IPX Peer to Peer* Supported OS: Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP. *IPX Peer to Peer is an original protocol developed by silex technology, Inc. -PRICOM C-700 10BASE-T compatible print server, which can be connected directly to parallel interface port.
-
Page 2: About This Manual
-If you have any question about this manual or our products, please contact our customer support. -This manual has been edited very carefully. However, silex technology, Inc. is not responsible for any mistakes included in this manual or any damages, direct or indirect, arising from the use of this manual. -
Page 3: Safety Instructions
1. PRICOM Warning: To avoid the risk of electric shock or possible damage, never remove the cover of PRICOM and never disassemble PRICOM. Contact the dealer of silex technology, Inc. products for assistance if repair or adjustment is necessary. Introduction... - Page 4 If that should happen, immediately turn off the power and unplug the power cord. Contact the dealer of silex technology, Inc. product for appropriate assistance. To avoid damage to PRICOM, never allow any liquids to spill into any part of PRICOM, and never expose PRICOM to rain or water.
- Page 5 Avoid using PRICOM in dusty areas since dust particles can affect the reliability of PRICOM. Contact the dealer of silex technology, Inc. product if your device has become contaminated with dust or dirt particles.
-
Page 6: Emission Notice
Users Manual CX Emission Notice PRICOM C-700/C-6100U This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 7 Users Manual CX PRICOM C-5100/C-6200U This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the PRICOM PRICOM C- 5100 and is the answer not in the manual?
Questions and answers