Silex technology C-6700WG Setup Manual

C-6700WG
Setup Guide
W A 0 5 8 6 0 X X
Thank you for purchasing silex technology's C-6700WG (this product).
This is a USB 2.0 Hi-speed print server exclusively designed for the Canon printers. It supports IEEE802.11b/g
and 10BASE-T/100BASE-TX. In addition to the printing function of a single function printer, the scanner,
memory card reader and fax functions are available over the network if you use this product with a Canon MFP.
This product supports 2 operation modes described below.
Select one according to how you would like to use your Canon devices.
[ Full feature (Device Server) Mode ]
Allows you to use printers or scanners on your LAN as if they are connected directly to the USB interface of
your computer. (Supports Windows / Macintosh)
[ Print Server Mode ] (Default)
Allows you to use printers on your LAN with the print client software, "CX Print", which supports the status
monitor for Canon printer drivers. (Supports Windows)
- Macintosh is not supported.
- Printer calibration feature is not supported.
Step2 : Initial con guration of this product
<< for Windows >>
Step 2 explains the initial con guration process when 1 Please insert the CX User Software into your
this product is connected to the wired LAN via a Windows PC.
network cable. You can use the C-6700WG through a
wired or wireless LAN after the con guration is
* If the C-6700WG product has been used in another
completed.
network, reset it to factory default prior to setup.
* Be sure to use the bundled AC adapter.
7 8
Enter an IP address for this product. Click Enter the wireless parameters to use this product with
Assign IP Address. Enter an IP address and click
a wireless LAN.
Next.
When you will use C-6700WG in the wireless LAN,
select the wireless network that you wish to use from
* When using DHCP/BOOTP server etc. please click Get
the list, enter the wireless network key and click Next.
IP Address Automatically.
<< for Macintosh >> 1 Please insert the CX User Software into your
Macintosh PC.
* If the C-6700WG has been used in another network, reset
Step 2 explains the initial con guration process when
it to factory default prior to setup.
the C-6700WG is connected to the wired LAN via a
* Be sure to use the bundled AC adapter.
network cable. You can use the C-6700WG through a
wired or wireless LAN after the con guration is
completed.
9
8
Click Get IP Address Automatically and then Enter the wireless parameters to use the C-6700WG
with your wireless network.
click Next.
If you plan to use the C-6700WG on a wireless
network, select the SSID or Network Name that you
* When Get IP Address Automatically is selected, IP
wish to use from the list, enter the wireless network
address is automatically obtained. When the window
without the selection of Get IP Address Automatically key (either WEP Key, or WPA/WPA2-PSK) and click
is displayed, please enter the IP address (mandatory), Next.
subnet mask, and default gateway.
Safety instructions are noted in the Readme le on the CX User Software.
Be sure to read them before using this product.
- Safety instructions regarding the radio waves
Please note the following instructions:
- Do not use this product near medical devices such as a heart pacemaker.
The radio wave generated by this product may interfere with the operation of these devices and may threaten
one's life.
- Do not use this product near microwave ovens. The radio wave used by microwave ovens may cause
interference to this product.
Introduction
This product has 6 methods of initial con guration as listed below:
- Con guration through a wired LAN
- Con guration through a wireless LAN
- Con guration using a USB memory
- Con guration using Windows Connect Now
- Con gure Using a Push Switch
- Con gure Using a PIN Code
This Setup Guide describes how to con gure this product through a wired LAN. For other con guration methods,
please refer to the separate sheet, "Easy Wireless Con guration Using WPS" or the online manual included in
the CD-ROM.
2 3
Please select Wired.
Please select Print Server Setup from the menu.
* If the screen does not appear automatically, open My * Select the network connection type. Click Wired for a
Computer, select the CD-ROM drive and execute wired network.This Setup Guide explains how to
Autorun.exe. con gure with a wired network.
9
Select an operation mode and click Next.
* Enter the wireless con guration information prepared in advance. If
the wireless network that you wish to use is not shown in the list,
click Detailed Con g and con gure each setting. For Detailed
Con g, please refer to the online manual.
If you are going to use C-6700WG with a network cable instead of
wirelessly, upon completing the con guration, check Skip wireless
con guration and click Next.
2 3
In a Macintosh environment, double click the
CD-ROM icon and then double click CXSetup.
Please select Print Server Setup from the menu.
10
* Enter the wireless con guration information prepared in advance. If Select an operation mode and click Next.
the wireless network that you wish to use is not shown in the list,
click Detailed Con g and con gure each setting. For Detailed
Con g, please refer to the online manual (found on the CD or at
www.silexamerica.com/support).
If you are going to use C-6700WG with a wired network cable
instead of wirelessly, upon completing the con guration, check
Skip wireless con guration and click Next.
Step1 Connect this product to the network
1 2
Connect a network cable to this product.Connect the Connect the power supply to this product, and then
other end of the network cable to one of the following insert the AC Plug into the electric outlet. Always use the
devices which has already been connected to the AC adapter bundled with this product.
network.
- Access point
- Broadband router
- Ethernet hub
Use a crossover cable when connecting this product
directly to the PC.
4
Click Next.
* When in a Windows XP environment (SP2 or higher), the message
will be displayed. Select Yes.
* The User Account Control screen is displayed when con guration
is performed on Windows Vista. Select Continue.
* The User Account Control screen is displayed when con guration
is performed on Windows 7. Select Yes.
10 11
Please con rm the con guration parameters and Select Yes and click Finish.
click Execute.
4
5
Please select Wired. Click Next.
* Select the network connection type. Click Wired for a
wired network.This Setup Guide explains how to
con gure with a wired network.
11 12
Please con rm the con guration parameters and Select Yes and click Finish.
click Execute.
3
To reset to the factory default settings
1. Remove the AC plug from the electric outlet.
2. Push and hold the push switch while
re-inserting the AC plug into the electric outlet.
Continue holding.
3. The Status LED(Orange) will light when the
factory default con guration settings have
been restored. Release the push switch.
Verify the Link LED (Green) turns on and the Wireless
LED (Green) turns o . C-6700WG
Outlet
(1)
(2)
Push Switch
(2)
AC adaptor
5 6
Read the agreement and click Yes to accept. Select this product and click Next.
* When this product is not found in the list...
- Please con rm that the IP address of PC is
con gured correctly.
- If you use security or rewall software, including
those embedded in Windows XP, please
temporarily disable them.
12 13
To re ect the wireless con guration, disconnect
Connect the C-6700WG and the printer with a
the power plug from the outlet and unplug the USB cable. Connect the power supply to the
network cable. Do not unplug the network cable if C-6700WG, and then insert the AC Plug into
the electric outlet. The initial con guration of
you plan to use the C-6700WG with a wired LAN in
this product is complete. Go to Step 3-3.
operation.
6 7
Read the agreement and click Yes to accept. Select this product and click Next.
* If the C-6700WG is not found in the list...
- Please con rm that the IP address of PC is
con gured correctly. Please check that any
rewall or other security software has been
properly con gured to allow discovery.
13 14
To re ect the wireless con guration, disconnect Connect the C-6700WG and the printer with a
the power plug from the outlet and unplug the USB cable. Connect the power supply to the
network cable. Do not unplug the network cable C-6700WG, and then insert the AC Plug into the
when using the C-6700WG with a wired LAN in electric outlet. The initial con guration of the
operation. C-6700WG is complete. Go to Step 3-4.
(3)Status LED
(Orange)