Table of Contents
Advertisement
Verify the network configuration in Windows 2000 (NetBIOS over TCP/IP)
Verify that Network - Internet Protocol(TCP/IP) - Client for Microsoft Networks has been
added as well as NetBIOS Internet Protocol(TCP/IP).
1. Select Start - Settings - Control Panel - Network and Dial-up Connections.
2. Open the properties of Local Area Connection.
3. Click Properties on the main screen to bring up the Properties screen.
4. Verify that Client for Microsoft Networks has been added.
- If you cannot find Client for Microsoft Networks in the list, click Install then select Client -
Client for Microsoft Networks.
5. Verify that Internet protocol (TCP/IP) has been installed.
- If you cannot find Internet protocol (TCP/IP) in the list, click Install then select Protocol -
Internet Protocol(TCP/IP).
6. Open Internet Protocol (TCP/IP) - Properties - Advanced - WINS tab, and make sure
the Enable NetBIOS over TCP/IP is selected.
- When receiving the TCP/IP settings automatically from DHCP, verify that the Use NetBIOS
setting from the DHCP server is selected.
Storage Server
Users Manual CX2
5-7
Advertisement
Table of Contents
Need help?
Do you have a question about the Print/Scanner/Storage Wireless Server PRICOM C-6400W and is the answer not in the manual?
Questions and answers