1. Manuals
  2. Brands
  3. Silex technology Manuals
  4. Print Server
  5. PRICOM R-9100U
  6. User manual

Silex technology PRICOM R-9100U User Manual

Mini print server
Hide thumbs
Table of Contents

Advertisement

Quick Links

II. About the PRICOM R-9100U
The PRICOM R-9100U is a mini print server that supports 10BASE-T/100BASE-TX and has
a USB connection. This server is a USB2.0 Full Speed print server developed exclusively for
Aficio G printers. Using the Aficio G status monitor, you can check the printing job status or
printer status.

Operating Environment

System requirements for the network connection
-Network cable (Category 5 in 100BASE-TX environment)
-USB Cable
-Ethernet HUB
-Printer
Network Environment
Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003
Operating environment
-Temperature
-Humidity
Storage environment
-Temperature
-Humidity
EMI
VCCI Class B
FCC Class B
EN55022 Class B
EN55024
About the PRICOM R-9100U
Users Manual RX
: 10°C to 35°C
: 20% to 80% RH (no condensation allowed)
: -10°C to 50°C
: 20% to 90% RH (no condensation allowed)
2-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRICOM R-9100U and is the answer not in the manual?

Questions and answers

Related Manuals for Silex technology PRICOM R-9100U

Summary of Contents for Silex technology PRICOM R-9100U

  • Page 1: Operating Environment

    Users Manual RX II. About the PRICOM R-9100U The PRICOM R-9100U is a mini print server that supports 10BASE-T/100BASE-TX and has a USB connection. This server is a USB2.0 Full Speed print server developed exclusively for Aficio G printers. Using the Aficio G status monitor, you can check the printing job status or printer status.

  • Page 2: Parts On The Pricom R-9100U

    Users Manual RX Parts on the PRICOM R-9100U Parts and Function Bottom Ethernet Address STATUS LED (Orange) 10BASE LINK LED (The last 6 digits are the product’s serial number) (Green) 100BASE LINK LED (Green) Back Right Side LINK LED (Green)
  • Page 3 Remove your hand from the push switch. - Do not turn off the power to the PRICOM R-9100U while it is initializing to factory default. - When the PRICOM R-9100U is turned on again after factory default is completed, do not push on the push switch.

  • Page 4: Hardware Installation

    Hardware Installation The PRICOM R-9100U connects to a network environment - If you have already used the PRICOM R-9100U on another network, initialize the PRICOM R- 9100U to factory default. - The PRICOM R-9100U can not be used with a USB HUB.
  • Page 5 Users Manual RX 4. Turn on the printer, and check that it works correctly. - Power on the PRICOM R-9100U first, prior to powering on the connected printer. - Using an AC adapter other than the one supplied may cause a problem.

  • Page 6: Functional Specification

    - To use the DHCP function, please contact your network administrator. RARP The PRICOM R-9100U supports RARP protocol. The IP address can be set within the network where the RARP server is operating. - Please consult your network administrator when using the RARP function of the PRICOM R- 9100U.
  • Page 7 Web Browser The PRICOM R-9100U is equipped with a HTTP server that allows you to monitor the printer status or change the configuration of the PRICOM R-9100U using a web browser. If the network is connected to the internet, product support information can be obtained.

  • Page 8: Hardware Specification

    Status (Orange), one for Link (Green) - If the firmware version of the PRICOM R-9100U is 2.0.0 or newer, in addition to the LEDs on the top of the PRICOM R-9100U, the PRICOM R-9100Uhas the STATUS LED(Orange) and LINK LED(Green) on the upper part of the network connector.

  • Page 9: Software Specification

    - IP Address can be set with Setup Utility. NOTE IPX Peer to Peer Supports silex technology, Inc. original protocol. Supported MIB SNMP MIB-II, Host Resource MIB, JCI-Private MIB* *JCI-Private MIB is an original MIB of silex technology, Inc. About the PRICOM R-9100U...

Table of Contents