How To Communicate To The Pricom C-6400W; Procedure For Initial Communication With The Pricom C-6400W - Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W User Manual

How to Communicate to the PRICOM C-6400W

Procedure for initial communication with the PRICOM C-6400W

The following explains how to initially communicate with the PRICOM C-6400W until the
wireless parameters are configured.
- 802.11 Ad hoc mode
The PC's wireless parameters must match the PRICOM C-6400W's.
Change the PC's wireless settings to match the default settings of the PRICOM C-6400W
which are:
Mode : AdHoc mode (802.11 Ad hoc mode)
SSID : GROUP
Channel : 11
WEP : (none)
- Infrastructure mode
The PRICOM C-6400W's wireless mode can be changed to Infrastructure by using the push
button. The PC's wireless settings and an access point will still need to match the default
settings of the PRICOM C-6400W.
- If you configure to infrastructure mode, do not use WEP in your access point.
- If you cannot connect to the PRICOM C-6400W, initialize to factory default and try again.
- Refer to 2, PRICOM C-6400W - Start in Infrastructure mode for instructions on how to change
to infrastructure mode.
PRICOM User Software CX2
Users Manual CX2
3-3