10.2 Heating contractor menu
wolf-heiztechnik.de
Contractor
Password: 1234
Contractor menus
Alarm management
Service
Backup mode
Night ventilation
Limits
Esc BACK
SELECTION
10.2.1 Alarm management
Alarm management menus
Filter monitor
Frost protection
Air flow monitoring
Alarm memory
------------------------------
Esc BACK
SELECTION
26
10. Operating level 2
Standard mask
Setting heating contractor parameters
The Wolf logo will be displayed. Pressing
password (1234), which can then be changed with
reach the heating contractor menu. There, by pressing
menu points displayed. After selecting the required menu point you enter the required
sub-menu by pressing
no adjustment was made for more than 2 minutes, the standard display will return
automatically.
Overview:
→
Alarm management
Service
→
→
Backup mode
→
Night ventilation
Limits
→
→
Preheat program
→
Pump control
Air dampers
→
→
Cooling
→
Compensation
Temperature control
→
DISPLAY
→
Extension time
→
Peak ventilation
→
Air quality
→
Pressure / flow rate ctl
→
Humidity control
→
HR Ice guard
→
Other...
Standard mask
Alarm management
Adjusting parameters concerning alarm messages and functions as well as
displaying the alarm history.
Pressing
After selecting the required parameter you enter the required sub-menu by pressing
DISPLAY
.
Overview:
→
Filter monitor
→
Frost protection
Air flow monitor
→
→
Alarm memory
Main menu
Esc
. Pressing
Esc
Esc
Main menu
Esc
enables selection between the overview of the illustrated menu points.
Heating contractor
prompts entry of the heating contractor
. By confirming with
you select from the
returns you to the standard display. If
Heating contractor
3062878_201707
you