Hours Run; Others; Time Functions; Seven-Day Program - Wolf WRS-K Installation And Operating Instructions Manual

Hours run

Displays
Hours run
System
Fan
Esc BACK SELECTION

Others

Displays
Software: KG Control
Version: 5.0.001
Date: 06/10/2011
Esc BACK SELECTION

9.3.3 Time functions

Time functions
7-day program
Day program
Set values
Holiday program
Date/time
Esc BACK SELECTION
7-day program
Program overview
Mon Tue Wed Thu Fri
P1 P1 P1 P1 P1
Esc BACK SELECTION
22

9. Operating level 1

Pressing
AB-01
→ Total system (Main switch on)
→ Fans
→ Heating water pump
→ Cold water pump
0 h
0 h → Direct evaporator
→ Electric heater bank
DISPLAY
→ Heat pump
→ No reheater bank
→ Last filter test
Pressing
configuration.
Once the language selection menu point is selected, the relevant language
AI-01
can be highlighted by pressing the key. The key enables the selection of the
required language, which is adopted by pressing the key again.
Available languages:
German, English, French, Dutch, Italian, Spanish, Portuguese, Hungarian, Swedish,
Danish, Russian, Czech, Slovak, Slovenian, Polish, Latvian, Lithuanian
DISPLAY
Standard mask
This is where settings are made regarding the time-controlled operation, date and
time.
Pressing
After selecting the menu point required, pressing
sub-menu.
DISPLAY
Overview:
→ 7-day program
→ Day program
→ Set values
→ Holiday program
→ Date/time
Individual programs are assigned to the individual days of the week via the 7-day
program. If no program is assigned to a specific day of the week, then the system
WP-01
will remain switched off for the whole day.
Pressing
Sat Sun
assigned with
P1 P1
pressing of
as described above. Once all settings or changes have been made, terminate the
process by pressing
DISPLAY
corner). One more push of
shows in sequence the hours run by the installed components.
shows in sequence first the software version and then the system
Main menu
Esc
enables selection between the overview of the illustrated menu points.
highlights Monday to which one of the 4 day programs (P1 - P4) can be
. If the system should remain off on that day, select "--". Further
enables a day program to be assigned to the next day in the week
Esc Esc . The cursor then returns into its home position (top l.h.
exits the 7-day program.
Esc Esc
Time function
leads you to the selected
3062878_201707