Displays; Sensors; Components - Wolf WRS-K Installation And Operating Instructions Manual

9.3.2 Displays

Menus - Displays

Sensors

Components

Hours run
Other...
Esc BACK SELECTION
Sensors
Displays
Room temperature
18.0 °C
Esc BACK SELECTION
Components
Displays
Fan stage
< OFF >
3062878_201707
9. Operating level 1
Standard mask
All available sensors and components are displayed.
In addition, the software version and the system configuration can be called up; the
menu language can also be changed.
Pressing
DISPLAY
After selecting the menu point required, pressing
sub-menu.
Overview:
→ Sensors
→ Components
→ Hours run
→ Other...
Pressing
sensors.
AS-01
Overview:
→ Room temperature
→ Rel. humidity (room) → Outside temperature, day → High pressure RC2
→ Vent. air temperature → Outside temperature, total → Low pressure RC1
DISPLAY
→ Rel. hum., vent. air
→ Extract air temp
→ Rel. hum., extract air → Flow rate
→ Outside temperature → Set value transducer
Pressing
connected components.
AK-01
Overview:
→ Fan stage
→ Fan speed
→ Pump, heating circuit
→ Heating water valve
→ Pump, cooling circuit
→ Cold water valve
→ Electric heater bank
→ Direct evaporator
Main menu
Esc
enables selection between the overview of the illustrated menu points.
enables the display in sequence of the actual values of connected
→ Icing-up temperature
→ Air quality
→ Air pressure
enables the display in sequence of the current status, subject to the
→ Mixer air damper
→ Heat recovery
→ Humidifier
→ Ext. enabling
→ KG/WO
→ Reheater bank
→ Heat pump
Displays
leads you to the selected
→ High pressure RC1
→ Low pressure KK2
21