Declaretion Of Conformity - Orbit Merret OM 36DC Manual

INSTRUCTIONS FOR USE - OM 36
7. DECLARATION OF CONFORMITY
Company:
Manufactured:
declares at its full responsibility that the product presented hereunder meets all technical requirements, is safe for use when
utilised under the terms and conditions determined by ORBIT MERRET, spol.s r.o. and that our company has taken all measures
to ensure conformity of all products of the type listed hereunder, which are being brought out to the market, with technical
documentation and requirements of the appurtenant statutory orders.
Product:
Type:
Mode of asses. of conformity: §12, par. 4 b, d of Act No.22/1997 Sb.
Conformity is assessed pursuant to the following standards::
Electrical safety:
EMC:
and government ordinance:
Electrical safety:
EMC:
The evidence are the protocols of authorized and accredited organization:
VTÚE Praha, experimental laboratory No. 1158 accredited by ČIA, o.p.s. with EN ISO/IEC 17025
Place and date of issue:
14
ORBIT MERRET, spol.s r.o. (Ltd.)
Klánova 81/141
142 00 Prague 4
Czech Republic
IDNo: 00551309
ORBIT MERRET, spol.s r.o. (Ltd.)
Vodňanská 675/30
198 00 Prague 9
Czech Republic
3 1/2 - digit programmable panel instrument
OM 36, in versions: DC, AC, PM, OHM, RTD
EN 61010-1
EN 50131-1, par. 14 and par. 15
EN 55022
EN 61000-3-2 + A12, Cor. 1, change A1, change A2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11, par. 5.1 and par. 5.2
No. 168/1997 Sb.
No. 169/1997 Sb.
Prague, 14. januar 2001 Miroslav Hackl
Company representative