4 digit programmable universal instrument. dc voltmeter/ammeter,process monitor, ohmmeter,thermometer for pt 100/500/1 000,thermometer for ni 1 000, thermometer for,thermocouples displays for lin ,potentiometers. (85 pages)
3 1/2 digit programmable. dc voltmeter/ammeter. ac voltmeter/ammeter. process monitor. ohmmeter/ thermometer for pt 100/500/1 000. thermometer for ni 1 000. thermometer for thermocouples. display inst. for lin. potentiometers (40 pages)
Page 1
GUARANTEE OMM 37 3 1/2 DIGIT DC VOLTMETER/AMMERMETER PROCESS MONITOR THERMOMETER FOR Pt 100...
Page 2
For safety information the EN 61 010-1 + A2 standard must be observed. This instrument is not explosion-safe! TECHNICAL DATA Measuring instruments of the OMM 37 series conform to the European regulation 89/336/EWG and the Ordinance 168/1997 Coll. They are up to the following European and Czech standards:...
Page 3
Certificate of guarantee ................11 INSTRUCTIONS FOR USE OMM 37...
INSTRUMENT DESCRIPTION Description The OMM 37 model series include simple 3 1/2 digit panel instruments in these alternatives: DC voltmeter/ammeter Process monitor Thermometer for Pt 100 sensors For their dimensions the instruments are suitable for mosaic panel installation. ADJUSTABLE DISPLAY PROJECTION Setting by potentiometers from the back of the instrument (in the range of approx.
Provided this cannot be secured it is necessary to use shielded leads with connection to ground. The instruments are tested in compliance with standards for use in industrial area, yet we recommend to abide by the above mentioned principles. OM 37DC, PM OM 37RTD INSTRUCTIONS FOR USE OMM 37...
(approx. ±10 %) Full range Offset shifting zero (compensation of 2-wire lead for OMM 37RTD), the trimmer is fitted only in the OMM 37PM and RTD model Full range Offset Brightness regulation INSTRUCTIONS FOR USE OMM 37...
Page 7
INSTRUMENT SETTING INSTRUCTIONS FOR USE OMM 37...
10x (t < 100 ms), 2x (long-term) Calibration: at 23°C and 40 % r.h. POWER SUPPLY 7…12 V AC/DC, max. 100 mA 10…30 V AC/DC, max. 160 mA (DC), 280 mA (AC), (24 VDC/55 mA), isolated INSTRUCTIONS FOR USE OMM 37...
Page 9
7. TECHNICKÁ DATA TECHNICAL DATA INSTRUCTIONS FOR USE OMM 37...
Page 10
INSTRUMENT DIMENSIONS Front view Panel cut 48 mm 43,5 mm Side view 72 mm 5 mm Panel thickness: 0,5...20 mm INSTRUCTIONS FOR USE OMM 37...
Page 11
- other unprofessional interference nprofessional interference The manufacturer performs guarantee and post-guarantee repairs unless provided for otherwise. ms guarantee and post-gua st-guarantee repairs unless provided for otherwise. e repairs unless provided for otherwis Stamp, signature INSTRUCTIONS FOR USE OMM 37...
Page 12
NOTE TECHDOK - OMM 37 - 2009 - 6v1 - en - V INSTRUCTIONS FOR USE OMM 37...