Larsen & Toubro C*2000 Series User Manual page 67

Chapter 5 – Function list
Function group 2
Address
LED Parameter
for
display name
comm
Parameter
H93 135D
initialize
Password
H94 135E
register
Parameter
H95 135F
lock
5-22
Range Description
This parameter is used to initialize
parameters back to the factory default
value.
0 -
1 All parameter groups are initialized
0 ~ 5
to factory default value.
2 Only Drive group is initialized.
3 Only Function group 1 is initialized.
4 Only Function group 2 is initialized.
5 Only I/O group is initialized.
0 ~ Password for H95-[Parameter lock].
FFFF Set as Hexa value.
This parameter is able to lock or unlock
parameters by typing password
registered in H94.
0 ~
UL Parameter change enable
FFFF
(Unlock)
Parameter change
L (Lock)
disable
Adj.
Factory
During Page
defaults
run
0 X 8-30
0 O 8-31
0 X 8-32
Cx2000 AC Drive