Larsen & Toubro C*2000 Series User Manual page 16

 When two or more inverters are installed, the inverters must be installed in proper positions away
from the outlet, whose distance shall be 2mm or more (refer to the following figure)
 Installed the inverter using screws or bolts to insure the inverter is firmly fastened.
 Two or more inverters are installed in a location where ambient temperature is over 30℃，please
refer to temperature derating curve in chapter 13.3.
Proper Installation
Take caution on proper heat ventilation when arraning control cabinet to form logical air
convection to reduce the heat production of the inverter.
Cx2000 AC Drive
< For installing multiple inverters in a panel >
Proper Installation
Chapter 2 INSTALLATION & WIRING
Improper Installation
Caution
Improper Installation
2-2