Analog Output - Larsen & Toubro C*2000 Series User Manual

 When the fault condition is reset via the STOP/RST key or multi-function terminal, information displayed in
the nOn will be moved to H1. In addition, the previous fault info stored in H1 will be automatically moved to
H2. Therefore, the updated fault info will be stored in the H1.
 When more than 1 fault occurred at the same time, faults will be stored in one code.
 Data in H1~H5 will be initialized during the initialization of parameters. When H6 is set to 1, the data in
H1~H5 will be initialized as well.
 After confirmation, the fault will be moved to other codes as follows:

9.4 Analog Output

Group Code Name
I/O Group I50 Analog output item select
I51 Analog output level adjustment
Output item and the level from the AM terminal are selectable and adjustable.

 I50: The selected item will be output to Analog output terminal (AM).
I50 Analog output item
select

I51: If you want to use Analog output value as a gauge input, the value can be adjustable according to
various gauge specifications.
Cx2000 AC Drive
Fault
types
0 Output frequency.
1 Output current
2 Output voltage
3 Inverter DC link voltage
0 ~ 10Vdc
AMT
CM
Operating status at
fault
Set Value Range
- 0 ~ 3
- 10 ~ 200
Item corresponding to 10V
200V 400V
Max Frequency (F21)
150% of Inverter rated
current
282Vac 564Vac
410Vdc 820Vdc
Chapter 9 Monitoring
Default Unit
0
100 %
9-5