4.6 Monitoring of operation status
Output current display
Monitoring output current in Drive group
Drive group
1
2
3
4
The same method is used to monitor dCL (Inverter DC side voltage) or vOL (Inverter
output voltage) of Drive group and so on.
Cx2000 AC Drive
ENT
ENT
st
-. The 1
parameter of Drive group is displayed.
-. Press the Up () or Down () key until [CUr] is displayed.
-. Monitoring output current code is displayed
-. Press the ENT key.
-. Present output current of inverter is 5 [A].
-. Press the ENT key again.
-. Return to the output current monitoring code.
Chapter 4 Parameter setting
4-10