Table of Contents
Advertisement
Document 2130972. Rev 1.0 Apr.08
3.
If a window appears, prompting you to enter your
password, enter your Mac password, and then click
Watcher Lite displays a status message or the "Activation
Assistant" window.
4.
Use the following table to determine your next actions.
Table 4-1: Text/window displayed, and your next
action
Text/window
displayed
"Disconnected"
Your device is preactivated. You are ready to
connect to the network. Proceed to
Lite window"
"Device is Locked"
Your device is preactivated. Unlock the device:
1.
2.
If you can't recall your lock code, try using the
last four digits of your device's phone number or
try 0000. If none of these work, contact your
service provider.
Once your device is unlocked, you are ready to
connect to the network. Proceed to
Lite window"
"Activation
Your device is not activated.
Assistant" window
1.
2.
"Not activated"
Your device is not activated. Use the Activation
Assistant (see
Description/next action
on page 42.
If the Unlock Device window is not
displayed: from the Extras item on the
Sierra Wireless Watcher menu, choose
Unlock Device.
In the Unlock Device window, enter the
lock code (PIN), and click OK.
on page 42.
Click Continue to indicate that you'd like to
activate your device.
Watcher Lite will display "Activating Sierra
Wireless Compass 597 EVDO Modem
Device."
Wait until the process is completed.
If provisioning is successful, Watcher Lite
displays "Disconnected," after which you
are ready to connect to the network.
Proceed to
"Watcher Lite window"
page 42.
If the Device Activation Failed! window is
displayed, use the Activation Assistant
(see
page
30).
page
30).
Activation
OK
.
"Watcher
"Watcher
on
29
Advertisement
Table of Contents
Troubleshooting
