System Configuration; The System Configuration Dialog - Simrad CS66 Installation Manuals

4-ch chart system

Hide thumbs Also See for CS66:

Table of Contents

3 SYSTEM CONFIGURATION

Note

20221867 / F

All configuration of the CS system is done from the System

Configuration dialog. This dialog is the entrance to all settings

that have to be done when configuring the system.

The following pages list the settings as they appear in the

dialogs. All these settings have to be performed before the CS

system is ready for operation.

To avoid unintended alteration of system parameters, the

System Configuration dialog is password protected.

Use the following procedure to open the System Configuration

dialog:

Press the Setup menu, followed by the System Configuration

command.

−A dialog will request a password before it is possible to

enter the system configuration.

Type "1234" in the Password field, and confirm the entry with

the OK button.

−The Input tab in the System Configuration dialog will

now be displayed.

SYSTEM CONFIGURATION

Table of Contents