Table of Contents
Advertisement
Simrad CS66 4-channels Chart system
Caution
10
Connecting external equipment
Four optical isolated NMEA converters are included in the CS66
system. These must be used for connecting external equipment
to COM1 – COM4 on the MC50.
Connect the 9-pins plug to the selected communication port on
MC50, and connect the cable to external equipment according to
the manufacturer's specification and according to the table
below.
COM 1-4
The supplied NMEA converters include active components
inside the connector house. No external equipment must be
connected to the system without using these cables. The cables
can only be replaced with cables ordered from Simrad!
SIGNAL NAME
RX +
RX -
TX +
TX -
GND
Braided screen
COLOR
Yellow
Red
Green
Blue
20221867 / F
Advertisement
Table of Contents
