Table of Contents
Advertisement
4.4 Re-installing/updating the CS software
Note
Note!
Caution
20221867 / F
BACK-UP AND RESTORE PROCEDURES
4
Press 2, 4 or 6 to start the selected restore procedure. A
running progress bar indicates that the procedure is
running.
5
Follow the instructions on the display, and eventually
insert a new CD/DVD if required.
6
Press any key to return to the main menu when the restore
is completed.
7
Remove the CD/DVD and restart the computer.
A re-installation of the CS software should only be necessary
when no back-up CDs are created as described in Making a
back-up, page 25.
1
Insert the CD labelled CHART SYSTEM or the CD
containing software update in the CD/DVD drive. The
installation of the CS system will now be automatically
started.
This CHART SYSTEM CD is not included in the delivery and
has to be ordered separately (part no. 26055384)!
2
Follow the instructions on the screen.
If the CS software is installed on a computer that already has
the chart system installed, the dialog box shown below will be
displayed. Select the Next button to avoid loosing previous
license information!
−The installation is completed when the following dialog is
displayed:
27
Advertisement
Table of Contents
