Backup And Restore Procedures; General; Making A Back-Up - Simrad CS66 Installation Manuals

4 BACKUP AND RESTORE PROCEDURES

4.1 General

WARNING!

4.2 Making a back-up

20221867 / F
BACK-UP AND RESTORE PROCEDURES
When the CS system is delivered from Simrad, the software for
both operating system and chart system are pre-installed from
factory.
No additional software should be installed on
the MC50 computer. Doing so may cause
malfunction on the CS system!
When the CS system is installed and configured, it is strongly
recommended to make a back-up of the complete installation. A
complete backup will include the operating system as well as all
setting made during the software configuration procedure.
If a restore of the system should be necessary and no backup is
available, the CS software will have to be re-installed from a CD
ordered from Simrad. Refer page 27 onwards. The software
configuration procedure will then have to be repeated.
Use the following procedure for making a backup of the
software installed on the computer:
1 Insert the CD labelled MC50 BOOT in the CD/DVD
drive.
2 Shut-down and restart the computer.
−The system will now boot on the CD, and the following
main menu will be displayed:
3 Replace the boot CD with a blank CD/DVD.
25