Table of Contents
Advertisement
Table 11. DIMM installation sequence (Independent mode/normal mode) (continued)
Number of DIMM installed
10
12
Memory mirroring population sequence
Table 12. DIMM installation sequence (mirror mode)
Number of DIMM installed
8
10
12
Memory rank sparing population sequence
Table 13. DIMM installation sequence (sparing mode)
Note: Signle-rank RDIMM is not supported by sparing. If you install signle-rank RDIMM, it switches to the
independent mode automatically.
Number of DIMM installed
2
4
6
8
10
12
Install a DIMM
Use this information to install a DIMM.
Before you install a DIMM:
1. Read the following section(s) to ensure that you work safely.
• "Installation Guidelines" on page 30
Attention: Memory modules are sensitive to static discharge and require special handling. In addition to the
standard guidelines for "Handling static-sensitive devices" on page 32:
• Always wear an electrostatic-discharge strap when removing or installing memory modules. Electrostatic-
discharge gloves can also be used.
• Never hold two or more memory modules together so that they touch. Do not stack memory modules
directly on top of each other during storage.
2 processors installed
Installation sequence (connectors)
1, 2, 4, 5, 8, 9, 10, 12, 13, 16
1, 2, 4, 5, 7, 8, 9, 10, 12, 13, 15, 16
2 processors installed
Installation sequence (connectors)
1, 4, 5, 8, 9, 12, 13, 16
1, 2, 4, 5, 7, 8, 9, 12, 13, 16
1, 2, 4, 5, 7, 8, 9, 10, 12, 13, 15, 16
2 processors installed
Installation sequence (connectors)
4, 12
4, 5, 12, 13
1, 4, 5, 9, 12, 13
1, 4, 5, 8, 9, 12, 13, 16
1, 2, 4, 5, 8, 9, 10, 12, 13, 16
1, 2, 4, 5,7, 8, 9, 10, 12, 13, 15, 16
.
Chapter 3
Solution hardware setup
47
Advertisement
Table of Contents
