Table of Contents
Advertisement
Figure 21. DIMM removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove a drive
Use this information to remove a drive.
Before you remove a drive:
1. Read the following section(s) to ensure that you work safely.
• "Installation Guidelines" on page 30
2. Turn off the corresponding DWC tray that you are going to perform the task on.
3. Remove the tray (see "Remove a DWC tray from the enclosure" on page 32).
4. Remove the tray cover (see "Remove the tray cover" on page 34).
Complete the following steps to remove a drive.
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BHNs9o9uS9u93aeU5BCI8I
• Youku:
http://list.youku.com/albumlist/show/id_51372950.html
Step 1.
Squeeze the spring steel latches on sides while lifting up on the top portion of drive cage.
.
Chapter 3
Solution hardware setup
37
Advertisement
Table of Contents
